How do I prepare the exterior of my house for painting?

  1. Step 1: Pressure-Wash Walls. To ensure best coverage, remove dirt and dust buildup from house using a pressure washer.
  2. Step 2: Repair Damaged Surfaces.
  3. Step 3: Remove Loose Paint.
  4. Step 4: Caulk Trim.
  5. Step 5: Prime Stains.
  6. Step 6: Protect Doors, Windows and Lights.
  7. Step 7: Paint Exterior.
  8. Step 8: Paint Trim and Doors.

Click to see full answer

How do I prepare the exterior of my house for painting?

  1. Step 1: Clean Your Home's Exterior with a Pressure Washer. A clean surface is essential for a good paint job.
  2. Step 2: Scrape Away Loose Paint.
  3. Step 3: Repair Surface Flaws With a Surface Repair Compound.
  4. Step 4: Recaulk.
  5. Step 5: Repair and Re-putty Windows.
  6. Step 6: Protect Your Yard With Drop Cloths.
  7. Step 7: Prime Bare Wood.

Can you paint over existing exterior paint?

Can I Paint Over Old Paint Without Sanding. If the existing paint is of the same type and the wall is in good condition, you can go ahead and paint without sanding. However, when it comes to wood, you may have to sand for proper adhesion. However, you can also skip the sanding process and make do with a primer.

Should a house be pressure washed before painting?

Pressure washing before painting is a chance to remove all dirt, debris, and cobwebs before painting. It's important to wash your house so that the new coat has the best chance to bond with the undercoat. By cleaning off all the gunk, we can make sure the paint goes on smoothly, not just rolling over dirt.

Do I need to clean exterior walls before painting?

A thorough scrubbing is a must before painting any exterior surface. It removes the dirt and broken-down paint residues that keep fresh coats from adhering and gets rid of mildew that grows on paint in all but the most arid climates.

Related Questions

Do you have to sand exterior walls before painting?

Sanding the exterior walls is necessary to provide a real mechanical bond between the coats of paint. If you don't rough up the surfaces sufficiently, your paint job may look good when you walk away from it, but in just a few years, the paint starts to show all sorts of errors.

Do I need to prime the exterior of my house before painting?

It's important to prime bare exterior wood prior to painting because it seals the grain, prevents bleed-through and improves paint adhesion. It's just as important to prime other materials, such as stucco, metal and concrete, for similar reasons. It seems like extra work, but it can save you time and paint.

What to use to wash exterior walls before painting?

Walls should be wet down before getting scrubbed, then washed with a gallon of water mixed with 1 cup chlorine bleach and 1 cup of either a concentrated, phosphate-free cleaner, such as a trisodium phosphate (TSP) substitute, or Jomax House Cleaner. Working in sections, from the bottom to the top, will avoid streaks.

Do I need to wash exterior walls before painting?

Wash. A thorough scrubbing is a must before painting any exterior surface. It removes the dirt and broken-down paint residues that keep fresh coats from adhering and gets rid of mildew that grows on paint in all but the most arid climates.

Do I need to prime existing exterior paint?

When it comes to residential exterior painting and interior painting, it's usually a good idea to prime before painting, especially if you're coating a new surface, a previously-painted surface that's falling apart, and/or need an extra boost in terms of color coverage.

Do you have to scrape all the paint off before painting?

Do you need to scrape all old paint off before painting? A universal answer is No, this is not necessary. You only need to remove all paint which has failed. Most of the time, just selected, problem areas, where paint has been compromised , must be removed.

How do you paint over old exterior paint?

How Do I Apply New Paint Over Old Paint?

  1. Wash the walls free of dust and grease.
  2. Fill the cracks, gaps, and holes with fillers, preferably a flexible filler.
  3. In case you are filling, make sure you sand and apply a primer to prevent a patchy look.
  4. Apply at least two coats of the new paint.

More items•

How long do you have to wait to paint a house after pressure washing?

Moisture within the siding following power washing
In a perfect world, you should wait about three to four days afterward before you start exterior painting. This gives typical surfaces like wood, brick, and other porous materials time to fully dry. It's never a good idea to paint onto still wet surfaces.

How clean should house be before painting?

A typical cleaning procedure would be to wash the siding once with the pressure washer and then spray it with a bleach or detergent solution and scrub out visible mold with a scrub brush. A final rinsing with the pressure washer then leaves the surface ready for painting.

What do you clean exterior with before painting?

A typical cleaning procedure would be to wash the siding once with the pressure washer and then spray it with a bleach or detergent solution and scrub out visible mold with a scrub brush. A final rinsing with the pressure washer then leaves the surface ready for painting.

What happens if I dont sand before painting?

If you don't sand before painting you will likely end up with an uneven finish and a paint job that will likely end up peeling after a few months. You may also be able to see any lighter or darker patches of the book come through the paint which looks ugly and unprofessional.

What to use to clean outside walls?

How to Clean Exterior Walls with Wet & Forget

  1. Mix one part of Wet & Forget with five parts of water in a garden sprayer.
  2. Saturate your walls with the solution and leave to dry for four to five hours – during that time, Wet & Forget gets on with the job, leaving you free to do other things.
  3. And that's it!

Can you use sugar soap on exterior walls?

Temporarily remove pot plants, garden hoses and any other items in close proximity to exterior walls. Wash walls with Sugar Soap and a sponge (following label directions) to get rid of any dirt or grime. Then hose down and allow time to dry. This will ensure the paint will adhere to the wall and not the dirt or grime.

What do you clean external walls with before painting?

Use a pressure washer to remove any loose paint and dirt. If any flaky paint remains, use a scraper to remove as much as possible. Repair any damaged surfaces and fill any holes or cracks. A clean surface will help new paint adhere to the surface.

How do you clean exterior walls before painting?

Your exterior walls should be thoroughly cleaned and any overhanging foliage cut back before you begin painting. A pressure washer will blast most grime and mould off the walls, but really stubborn areas should be tackled with one part bleach to six parts water, left to dry, then scrubbed clean with a wire brush.Feb 29, 2008

Categories:

QA