At the very least, preparing exterior trim and siding for painting involves thoroughly cleaning, lightly sanding, and priming the surface. It may also require scraping, stripping, reglazing, wire brushing, filling, and caulking.
Click to see full answer
Do you have to scrape all the paint off before painting?Do you need to scrape all old paint off before painting? A universal answer is No, this is not necessary. You only need to remove all paint which has failed. Most of the time, just selected, problem areas, where paint has been compromised , must be removed.
What do you clean exterior trim with before painting?
Finally, because the exterior of your home is exposed to the elements, make sure that the trim is clean before painting. For an effective exterior cleanser, mix a cup of bleach, a cup of trisodium phosphate and a gallon of water, and spray it over your trim.
How do you prepare exterior trim for painting?
Outlining proper preparedness, painting your exterior trim like a Pro
- Pressure wash exterior siding & trim.
- Inspect exterior trim.
- Scrape outside trim showing failure.
- Caulk all exposed trim outside.
- Fill all holes, gouges, intentions.
- Prime, scraped trim, or bare wood.
Do I need to prime exterior trim before painting?
It's important to prime bare exterior wood prior to painting because it seals the grain, prevents bleed-through and improves paint adhesion. It's just as important to prime other materials, such as stucco, metal and concrete, for similar reasons. It seems like extra work, but it can save you time and paint.
How much scraping is enough? As a standard rule of thumb, when there isn't any more flaking you're in good shape. Remember, your paint is going to bond to the surface and if that surface is loose and flaky, then the new paint has nothing to cling to.Sep 18, 2009
You need to fill holes, spackle and sand, maybe even cut a new piece of drywall in to the existing wall. Your best bet is to use a good layer of primer to ensure a smooth, consistent base layer for the colored paint. In this case, your primer will mask many of the imperfections you're trying to fix.
Preparing Exterior Trim for Painting, Step-by-Step
Start by scrubbing off all dirt and chalking paint with a scrub brush and a solution of trisodium phosphate (TSP). Rinse the trim thoroughly, and allow it to dry completely before preparing the surface for primer and paint.
For the best protection of the underlying wood and the longest lasting finishes, bare wood should be sealed with a water-repellent preservative (WRP) before priming and painting or staining. WRPs contain a small amount of wax or other water repellent and a mildewcide, fungicide, or both, usually in a solvent base.
Sand the edges of the old paint, where it has peeled away, carefully. Try to create a small "ramp" or slope from the bare wall to the thicker paint. Dust the wall and get ready to spread some drywall compound. Purchase some general-purpose drywall compound and mix it up in the container using a 6-inch drywall knife.Aug 30, 2007
According to experts, the easiest method for cleaning exterior surfaces is pressure washing. Sanding: Before painting new wood, sand all surfaces and edges lightly to smooth the grain. Then, remove the sanding dust and apply a suitable primer.
If you are deciding to paint bare wood, you should seal all knots (spot prime) with a shellac based primer. Shellac based primers are great for sealing wood knots and sap streaks. They do carry a pungent odour, but dry very quickly and will not let the knot bleed through the top (finish) coat.